Author

Kenny Nyhus Fadil

Smart Temperature and Humidity Sensors for Curing Chambers: Setup, Logging, and Calibration
Temperature & Humidity Science

Smart Temperature and Humidity Sensors for Curing Chambers: Setup, Logging, and Calibration

I run two SensorPush HT.W units in my own chamber — one at the meat shelf, one beside the cooling coil — plus an Inkbird IBS-TH3 logging into Home Assistant as a third opinion. That three-sensor stack costs about $145 and has caught two probe-drift events in 18 months that would otherwise have spoiled a […]

Read 9 min read
Cold Smoking Salami: When to Add Smoke and at What Temperature
Cold Smoking

Cold Smoking Salami: When to Add Smoke and at What Temperature

I add cold smoke to my salami in two 4-hour sessions on days 3 and 5 of the cure, after the LAB pH drop has finished and before the chubs go into long-term hang at 55°F. The chamber air temperature during the smoke sessions stays at 65 to 70°F in my basement — never above […]

Read 10 min read
Best Cheese to Age at Home for Beginners (5 Low-Risk Recipes)
Cheese Aging

Best Cheese to Age at Home for Beginners (5 Low-Risk Recipes)

I have aged a 2-pound waxed cheddar, two gouda wheels, and a manchego in my own chamber across the last 18 months, and the cheddar that came out of a 5-month aging at 53°F / 85% RH was demonstrably better than anything I had paid for at the deli counter. The five lowest-risk cheeses for […]

Read 10 min read
Salami Casing Mold: Good White Mold vs Dangerous Black/Green
Salami & Fermented Sausage

Salami Casing Mold: Good White Mold vs Dangerous Black/Green

Across six salami cycles in my own chamber, I have seen four of the five mold colors covered in this guide on at least one chub: white nalgiovense (every batch), Aspergillus niger black spots (twice), Penicillium expansum green (once on a batch where I forgot to inoculate), and Mucor cobweb gray (once when my fan […]

Read 11 min read
Duck Prosciutto: The 2-Week Beginner Charcuterie Project
Whole Muscle Charcuterie

Duck Prosciutto: The 2-Week Beginner Charcuterie Project

Duck prosciutto was my first cured-meat project — two Pekin breasts, $5 in kosher salt and pepper, 14 days in the chamber, and a sliceable result that beat what my local deli was charging $42 a pound for. It also validated that my chamber held 55°F and 75% RH for two consecutive weeks before I […]

Read 10 min read
Dry Aging Smell: What Is Normal vs What Means Trouble
Dry Aging Beef

Dry Aging Smell: What Is Normal vs What Means Trouble

I run a 90-day dry-aged ribeye in my chamber every winter, and the daily 2-second smell check at the chamber door is the single most useful diagnostic in the whole process. Healthy dry-aged beef smells nutty, slightly cheesy, and earthy — described by professional dry-aging operators as “blue cheese rind” or “browned butter” with a […]

Read 9 min read
Curing Chamber Too Humid: How to Fix Oversaturation Fast
Temperature & Humidity Science

Curing Chamber Too Humid: How to Fix Oversaturation Fast

I drop curing chamber humidity from 90%+ down to 75% in under 4 hours by combining three immediate actions: unplug the humidifier completely, increase fan run-time by 50%, and add a 2-pound tray of dry rice or coarse salt to the chamber floor as a desiccant. The salt-or-rice tray absorbs about 2 to 4% of […]

Read 9 min read
Curing Chamber Build Cost: What I Spent on My $200 Setup
Building a Curing Chamber

Curing Chamber Build Cost: What I Spent on My $200 Setup

I spent $186 on my first DIY curing chamber: $35 for a 4 cu ft Magic Chef mini fridge off Facebook Marketplace, $90 for the Inkbird ITC-608T dual-stage controller, $28 for a Pure Enrichment MistAire ultrasonic humidifier, $14 for a USB clip fan, and roughly $19 for a stainless rod and S-hooks from a restaurant […]

Read 12 min read
Black Mold on Charcuterie: Is It Dangerous or Just Ugly?
Troubleshooting & Food Safety

Black Mold on Charcuterie: Is It Dangerous or Just Ugly?

I have wiped Aspergillus niger off the casing of more than one of my own salami chubs over the last 18 months, and almost every case was cosmetic — a 50/50 white-vinegar wipe and a re-spray with Bactoferm Mold-600 brought the casing back to a clean white bloom within 72 hours. The exception was a […]

Read 9 min read